8/18/2023 0 Comments Accu chek inform ii stripsMeter re-set button (for meter freeze situation, press gently with paper clip a few seconds to re-boot) consult with Point of Care Testing first Re-Chargeable Battery Pack Charging Contacts (To Base Unit) Infra-red contact to upload lot information The reset button should be used to correct unspecified errors when the meter is not responding for any reason, examples include when the screen freezes, or when an error code is encountered. On/Off Buttonĥ Accu-Chek Inform II Meter Components – meter back view In addition, you can activate or deactivate the backlight with this button. To select any of these functions, simply touch the button on the screen.-Use fingers only On/Off Button: Press this button to turn the meter on or off. Touchscreen (touch-sensitive display): This screen allows you to perform patient and controls tests, review results. Test Strip Port Barcode Scanner (Laser) Operator ID Patient ID (in future) Control Solution 1 & 2 Inform II test strips Touchscreen-Main menu with 3 options (finger touch only ) Test Strip Port: Insert the test strip here – it is the ONLY opening on meter The integrated barcode scanner can be used to read operator and patient IDs, and reagent lot numbers (test strips and controls).-Ensure that you don’t flash bar code scanner at eyes-yours or others. Accu-Chek Inform IIĤ Accu-Chek Inform II Meter Components – meter front view Code Key is not mentioned here as the training is geared to nursing end users and they will never see it, only POCCs use the code key reader to input the lot numbers of reagents. May use training guide to go over all 3 components in more detail, so not to miss any info. But the meter can be used at any level of battery life, as it is charging. From a fully dead battery, if placed back in the base unit, it takes about 60 minutes to charge it enough to run a test. 6 hours to fully charge meter– Ideally, meters should always stay in base units. Docking the ACI II on the base unit when not in use will ensure that the meter is operational when required. Quick Reference Guide Explain the 3 components of the system emphasizing the charging function of the base unit. Tote Box Meter, strips, disinfectant swabs, Control 1 & 2, lancets, capillary pipettes. Green light - charging and properly placed in BU Red light – BU is first plugged into power outlet with no meter seated. Connected to network & power outlet Blue light – indicates data transfer. System Componentsīase Unit (BU) Automatic data transfer and battery charge. All other trademarks are the property of their respective owners.Ģ Accu-Chek Inform II Preliminary Review for Hands On Training Complete Quiz at the end of this session AccuChek Inform II System Components AccuChek Inform II Meter AccuChek Inform II Test Strip & Quality Control Material Key Points Cleaning the meter Operator ID & ongoing competency Perform a quality control test (QC) – Hands On Perform a patient test – Hands On AccuChek Inform II Meter ranges PHSA Normal/Critical ranges View results Quizģ Accu-Chek Inform II – components labelled as a unit. 1 ACCU-CHEK Inform II Operator Training Provincial Health Services AuthorityĪCCU-CHEK, ACCU-CHEK INFORM, ACCU-CHEK PERFORMA and COBAS are trademarks of Roche.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |